[Spridgets] Throw-out bearing

spridgets

[Spridgets] Throw-out bearing

Subject:	[Spridgets] Throw-out bearing
From:	dlh2001 at comcast.net (Dean Hedin)
Date:	Mon, 28 Nov 2011 21:03:48 -0500
References:	<mailman.11.1322506818.937.spridgets@autox.team.net> <E3E5A8C5-9365-4F7C-95C4-B01328812436@gerardsgarage.com>

Before I put the 5 speed in I used to have a ribcase with a roller bearing
throwout.  Does anybody still make these?

If not, someone should.

I believe it is still in my tranny up in the attic.  I should pull it out
and measure/photograph it.    

-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of Gerard
Sent: Monday, November 28, 2011 4:37 PM
To: Spridget list
Subject: Re: [Spridgets] Throw-out bearing

I too have heard many complaints of premature failure on current  
reproductions. I think the only one I would trust is the Borg and  
Beck, but I'm not sure if they are sold separately from their clutch  
kit. Just be aware if you go for a used one, that there are 3  
different ones; 948, 1098 and 1275 are unique per application, both  
with regard to carbon thickness and I believe pivot offset as well.

Gerard

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Spridgets] Throw-out bearing, (continued) [Spridgets] Throw-out bearing, kgb at frontiernet.net Re: [Spridgets] Throw-out bearing, Rick Fisk [Spridgets] Throw-out bearing, Rick Fisk Re: [Spridgets] Throw-out bearing, Bill L [Spridgets] Throw-out bearing, Bill L Re: [Spridgets] Throw-out bearing, Guy R Day [Spridgets] Throw-out bearing, Guy R Day Re: [Spridgets] Throw-out bearing, Gerard [Spridgets] Throw-out bearing, Gerard Re: [Spridgets] Throw-out bearing, Dean Hedin [Spridgets] Throw-out bearing, Dean Hedin <= Re: [Spridgets] Throw-out bearing, Gerard [Spridgets] Throw-out bearing, Gerard Re: [Spridgets] Throw-out bearing, Dean Hedin [Spridgets] Throw-out bearing, Dean Hedin Re: [Spridgets] Throw-out bearing, Rick Fisk [Spridgets] Throw-out bearing, Rick Fisk Re: [Spridgets] Throw-out bearing, Gerard [Spridgets] Throw-out bearing, Gerard Re: [Spridgets] Throw-out bearing, Peter Caldwell [Spridgets] Throw-out bearing, Peter Caldwell

Previous by Date:	Re: [Spridgets] Throw-out bearing, Dean Hedin
Next by Date:	[Spridgets] Ron Soave, ryan . kubanoff
Previous by Thread:	Re: [Spridgets] Throw-out bearing, Dean Hedin
Next by Thread:	Re: [Spridgets] Throw-out bearing, Gerard
Indexes:	[Date] [Thread] [Top] [All Lists]