Re: Blower

["John Crawley" <johnc@nait.ab.ca>]

A Ford Falcon Heater motor and squirrel cage can be made to fit and make a
real difference. The bracket that fits between the two halves of the
TIGER's blower motor has to have the hole enlarged a bit. A good round file
will accomplish this. The cage housing has to have the rivets drilled out
and the new cage put inside it and then is bolted back together. The motor
is then fitted to the housing and the cage tightened onto the motor shaft
with a long Allen wrench. This setup will really move air.
Godspeed
Jc