J&E wrote:
> I just completed tom halls tech tip on my mk1a tach. Previously it
> had no movement. I have a ford electronic ignition in the car. i get
> movement now but can't quite adjust the dashpot low enough. It reads
> about1100 rpm when my sun timing lite reads 775 . It also is a bit jumpy.
> About 200-300 rpm. Did my electronics guy put a resistor of the wrong value
> in? thanks
> steve b382001622
Steve,
I take it someone else bought the components and made the circuits. Most trim
potentiometers are clearly marked with their resistance range, as opposed to
color coded fixed resistors. The schematic, with correct values, is available
on STOA's web site as a PDF download, or can be seen - but not directly
downloaded - in Tom's Club Article on the TigersUnited web site:
http://www.TigersUnited.com/articles/ar-STOA.asp
Thanks to Tom Hall and STOA.
Steve
--
Steve Laifman < Find out what is most >
B9472289 < important in your life >
< and don't let it get away!>
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|