tigers
[Top] [All Lists]

RE: Heater box grill removal

To: "Tiger Email Network" <tigers@autox.team.net>
Subject: RE: Heater box grill removal
From: "Jane & Arden Bedell" <bedel003@tc.umn.edu>
Date: Tue, 8 Aug 2000 22:20:14 -0500
Thanks for the advice.  I was able to remove the grills using a combination
of prying and a wire loop around the center rib and a liberal doucing with
Liquid Wrench.

--Arden



> -----Original Message-----
> From: Stu Brennan [mailto:sbrennan@master.ncounty.net]
> Sent: Monday, August 07, 2000 7:39 PM
> To: Jane & Arden Bedell; Tiger Email Network
> Subject: Re: Heater box grill removal
>
>
> The grills are held in by two pins at the left/right ends of the grills,
> that go into some springy receivers in the cowl.  I got mine out with a
> hook like tool made out of a coat hanger.  The hook goes down into the
> slots, then you gently pull up at the ends, from the back.  No damage to
> the front.  Pull up near the pins at the ends, rather than in the
> middle.  It worked for me, but there may be other ideas floating around.
>
> Stu


<Prev in Thread] Current Thread [Next in Thread>