Cool, thanks Dave, not too far from one of Theo's suggestions. Perhaps a piece
of wire soldered around the perimeter of each end to offer a lip to deter
slippage?
Frank
B9471116
> Before I switched back to stock, I ran into the same problem.
> Finally a plumber friend took same scrap 1/2 and 5/8 copper
> pipes, inserted the 1/2 into the 5/8 and then soldered it well.
> Left about 4 inches on each end. I cut to what I needed and
> then clamped it well. Never leaked a drop. You can push
> the hoses together so that the union almost disappears.
>
> Dave Johnson
|