i did scott's approach, not bad at all, see pic
http://img.photobucket.com/albums/v650/peter212/IMG_0035.jpg
----- Original Message -----
From: "Scott Hutchinson" <shutchin@netjets.com>
To: <bamcnulty@optonline.net>; <tigers@autox.team.net>
Sent: Friday, April 11, 2008 9:50 AM
Subject: Re: [Tigers] Engine Removal
> Get a towing strap...
>
> Loop it around the firewall braces...
>
> Lift the front of the car once you have unbolted the engine etc...
>
> Somewhere there was a step by step for this. Don't remember where though.
>
> Best advice I got was to take pictures of everything before doing it and
> at a couple of steps along the way.
>
> Have fun..... ;)
>
> It's really not that bad.
>
> When you put the crossmember back on remember to jack the engine slightly
> to un load the frame rails. I couldn't get the third bolt for the
> crossmember into place no matter what I did. Figured there was something
> wrong with the car. I asked on the list and bingo....
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|
