tigers
[Top] [All Lists]

Re: [Tigers] Engine run in

To: Tim Webster <crabco@shaw.ca>
Subject: Re: [Tigers] Engine run in
From: genepadgett@comcast.net
Date: Sat, 19 Nov 2011 19:57:55 +0000 (UTC)
Just a PS and correction to my earlier reply.



I meant to say that the distributor rotates counterclockwise so that is the
way you should spin the oil pump.B  Thus the drill is set on reverse.



Also, I belatedly noticed that Lunati also recommended a fresh oil change and
filter after the initial runin session.B B It is the 30 weight oil that they
recommend you keep using for the first 500 miles.B  I was confusing that with
whether or not to also include breakin additive.B  Another manufacture
mentions doing that.B  I think you should just to maintain the appropriate
zinc levels which you can do with any of the other zinc replacement
additives.B  Something you will wan t to maintain throughout the future.B 
Again there are a fewB  oils out there that still have adequate levels in them
off the shelf.



GeneB 



----- Original Message -----


From: "Tim Webster" <crabco@shaw.ca>
To: tigers@autox.team.net
Sent: Saturday, November 19, 2011 10:56:49 AM
Subject: [Tigers] Engine run in

Hi to all,

B 

There is a bewildering array of conflicting information on the www regarding
the engine run in process. I have my newly rebuilt 260 nearly ready to fire
and am looking to the list for what is the best way to accomplish this job
in a way that will ensure a long and happy life for the engine (and by
extension, me).

B 

The engine is .030 over and apart from that was restored to stock specs.
Questions might include;

B 

-type of oil to use

-length of time before oil changes

-best rpm loading and duration of run in periods before allowing engine to
cool

-best way to ensure the engine will be free of air pockets (taking into
account the presence of the heater core

-best type of coolant to use

-thoughts on the use of synthetic oil during run in and/or after run in

B 

It was gratifying this week to turn the key and hear her turn over without
having to grab a fire extinguisher, if you know what I mean...

B 

Thank you,

Tim
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/genepadgett@comcast.net
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>