tigers
[Top] [All Lists]

Re: [Tigers] Distributor vacuum line

To: <genepadgett@comcast.net>
Subject: Re: [Tigers] Distributor vacuum line
From: " Ron Fraser" <rfraser@bluefrog.com>
Date: Sun, 30 Jun 2013 19:18:25 -0400
Cc: tigers@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: tigers@autox.team.net
Thread-index: Ac515VOMn29cYGfTS0ujFyCu0ZCkIgAAgNkw engine=2.50.10432:5.10.8794,1.0.431,0.0.0000 definitions=2013-06-30_08:2013-06-28,2013-06-30,1970-01-01 signatures=0 spamscore=0 suspectscore=4 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=7.0.1-1305240000 definitions=main-1306300287
Gene
    Any information helps.

You measured the full length of the vacuum line, correct and this was an
original Tiger part. (?)

My theory is that Rooted took up to 1/2" off the tube length at the
distributor.  This would pull the line back from the radiator hose.

Thanks
Ron

-----Original Message-----
From: genepadgett@comcast.net [mailto:genepadgett@comcast.net]
Sent: Sunday, June 30, 2013 6:58 PM
To: rfraser@bluefrog.com
Cc: tigers@autox.team.net
Subject: Re: [Tigers] Distributor vacuum line


Hi Ron,

I measured it at exactly 25 inches.  I used a piece of solid core electrical
wire, molded to the vacuum line and periodically taped to it to hold in
place, then detached it,  straightened it, and measured.  Hope that helps.
(Pic upon request!)

Gene


  _____

From: "Ron Fraser" <rfraser@bluefrog.com>
To: tigers@autox.team.net
Sent: Sunday, June 30, 2013 3:38:40 PM
Subject: [Tigers] Distributor vacuum line

 Tiger Trivia and facts plus I'm just curious

I noticed something interesting recently.

The stock Tiger distributor vacuum hard line only has a Rootes part number;
1224812.
There is no Ford part number listed.   This leads me to believe that Rootes
either made a new line or they modified the Ford part.

My theory is Rootes modified the Ford part.  The questions are did they and
by how much?
It's not impossible that Ford modified this part for Rootes but I would
expect a Ford part number attached to the part in that case.

Anyone have a known stock original Tiger engine distributor vacuum line?

Anyone have a stock Ford distributor vacuum line; I believe the C5ZZ part is
the one available now?

Anyone who went to England and the Archive - did you see this part drawing?

I did some very rough estimates of the difference between stock Ford and
Tiger pictures and found a Max difference of 1/2" shorter for the Tiger at
the distributor end.

I'm not sure the best way to measure this.   Maybe mark the middle of the
bend and use a wire form from the nut to the mark. (?)

Unfortunately I can not find where I squirreled away the hard line I did
have on my Tiger so I can't measure it.   I'll have to look deeper.

Ron Fraser
_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/tigers/genepadgett@comcast.net



No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3345 / Virus Database: 3204/6447 - Release Date: 06/28/13
_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>