Dimitri,
When the shuttle in centered, the path to ground is interrupted and your
dash light is off. If you get a ground on the spade terminal in the PDWA
switch, the shuttle is off-center.
There should be a wire near this switch with a female spade connector. That
is how it is connected to the wiring harness.
Regards,
Peter
on 4/3/02 4:46 PM, Dimitri Huygen at Dimitri.Huygen@skynet.be wrote:
> On my '70 TR6 i have a PDWA piston installed. The only problem is, this thing
> isn't connected electricaly, so i can't see on my dash if the PDWA shuttle is
> de-centralised.
>
> I'm going to try to connect the electrical socket on the piston to my
> electrical tester to see if this thing is making contact.
>
> Can anyone tell me :
> 1. When the PDWA is de-centralised, does the shuttle make contact or just not
> ?
> 2. Does anyone know how to connect this thing ?
>
> Thanks,
>
> Dimitri Huygen, Belgium
Peter Macholdt
609-466-2127 Phone
|