Walt et all,
Does any of this screw up the timming?
If the dizzy is set with the cam and the timming marks for TDC, then I don't
want to start turning this and knock off the timming when I put the dizzy back
on.
--
Gene Hart
genehart@att.net
1973 TR6 CF10918 U
(Now UO, thanks j.esposito)
Carmine to Pimento
(thanks PPG & Kojack Autobody)-The
owner looks like Kojack :)
Undergoing body & frame off, frame
and body reunited :)
(thanks patient & loving wife)
(c)(201)981-3327
> Can you take a dead distributor and gut it to use
> as an oil pump primer....... that's what I use on my
> Fords.. A piece of plastic tube would never work
> on a Ford SB, it takes a lot of torque to turn the
> oil pump.....
>
> Walt
> ----
>
> Jim Davis wrote:
>
> > You'll have to make one, as I don't think they are available
> > commercially. I've never done this on the oil pump, but a piece of
> > rubber tube over the oil pump shaft and a similar size bit in your drill
> > may work. It works on transmission input shafts.
> > Otherwise, you could machine or have machined a slot in a 1/2" dia. rod
> > to match the oil pump shaft.
> >
> > Jim Davis
> > Fortson, GA
> > CF38690UO
> >
> >
> >
> >
> >
> > Where can you get this "Adapter" for the distributor housing?
> >
> > Gene,
> > Cell - 201-981-3327
> > Home - 718-680-3207
|