Hi Aaron . Imade my dash from burlled readwood from
Oregon and I put 5 coats of Man-O- War spar varnish. I
also made 3/16th inch aluminum backing plate to keep the
wood from cracking and twisting. So far all is well. TC
> Has anyone has success making their own woodgrain dashboard... I am
> finishing the restoration on my car and the PO drilled into the dash...
> I want to replace it with a woodgrain dash and It looks very simple so
> What type of wood do you use and what is the varnish procedure...
>
> TIA
>
> Aaron T. Sudds
> Engineer
> FUJITSU TEN CORP. OF AMERICA
> Michigan Operation
> phone: (734) 414-6681
> telefax: (734) 414-6660
> asudds@mio.ten.fujitsu.com
>
>
|