datsun-roadsters
[Top] [All Lists]

Re: Rollbar Installation

To: "SCHMITT, JOHN, NTCOM" <jschmitt0@att.com>,
Subject: Re: Rollbar Installation
From: "Richard Wright" <duntov1@attbi.com>
Date: Mon, 4 Feb 2002 10:01:10 -0600
Also use a nomex sock or an "SA" rated helmet which has nomex in it. I've
heard ugly stories about melted helmets on racer's heads!
Rich Wright

69 2000
60 3000 V8 race car
64 Daimler V8 saloon
73 Jensen Healey
----- Original Message -----
From: "SCHMITT, JOHN, NTCOM" <jschmitt0@att.com>
To: <datsun-roadsters@autox.team.net>
Sent: Monday, February 04, 2002 9:40 AM
Subject: Re: Rollbar Installation


> When I installed my rollbar, it was for Solo 1 autox at a small road
course.  Midwest Council is the sanctioning body and they recommended using
a full back plate at all 4 mounting points.  I took the rollbar to a local
welding shop and he cut and drilled 6 inch heavy steel plates to match up
with the rollbar bases.  I then used #8 nuts and bolts.
>
> I also took the rollbar to Andresen Engineering that builds Formula Fords
and does lots of racecar mods and had them sleeve and then add 2 inches to
the height of the full bar.  I can still raise and lower the top(one side of
the top frame must be removed to get it up over the bar) but it gives me a
full 2 inches above my head with my Simpson on.  This 2 inches is also a
requirement of MC.   I spent about $120 doing these mods but if you need a
rollbar for anything other than looks, it is a good idea.
>
> When I asked my friend Dennis Tobin, another Roadster guy, about spending
all of this money on the rollbar and the best helmet, he said "its you head,
how much is it worth?".
>
> John Schmitt
> 847-458-7829
> Cell
> 847-691-4613
>
> ///  datsun-roadsters@autox.team.net mailing list
> ///  Send admin requests to majordomo@autox.team.net  or go to
> ///  http://www.team.net/cgi-bin/majorcool
> ///  Send list postings to datsun-roadsters@autox.team.net

///  datsun-roadsters@autox.team.net mailing list


<Prev in Thread] Current Thread [Next in Thread>