I mounted the battery in a box and also used a metal cage type hold down. The
battery is mounted close to the wall separating the trunk from the package tray
and is on the passenger side. I ran the cable through a hole on the drivers
side of the trunk and along the inside of the frame rail. I put the cable
inside a thick plastic hose to protect it from getting scuffed. I grounded the
battery to the body mounting bolt on the passenger side. I grounded the motor
to the frame with two battery cables attached to the fuel pump block-off plate.
I plan to mount a master cutoff switch in the opening where the fuel filler
used to be.
Andy
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|