[Top] [All Lists]

Re: Boring Liners-Sharing Info & Experience

Subject: Re: Boring Liners-Sharing Info & Experience
Date: Sat, 14 Jan 2006 08:19:31 EST
In a message dated 1/13/2006 10:42:50 PM Eastern Standard Time, writes:

My  engine man has a special mounting to bore them outside the block. I
really  question the boring in the block because how are the liners
compressed and  how is the upper part fixed because it can move
slightly sideways while  boring.

They need to be clamped in the block with a torque plate. My experience has  
been that they WILL change shape when they are torqued down, they distort 
about  half-way down the bore. 

===  unsubscribe/change address requests to

<Prev in Thread] Current Thread [Next in Thread>