what shoes/soles do you have?
----- Original Message -----
To: <firstname.lastname@example.org>; <email@example.com>
Sent: Saturday, October 25, 2008 1:23 PM
Subject: Re: [Fot] ... + racing Triumph-related question
>a message dated 10/25/2008 4:08:45 P.M. Eastern Daylight Time,
> firstname.lastname@example.org writes:
> Is the slippage that is being described, between the shoe and the
>>> floor or
>>> with the pedals? I would think that the Pedals are the main concern.
>>> If that is the case, putting some sort of abrasive surface on the
>>> might be the solution.
> The best way to solve this in my experience is to remove the pedals and
> drill 1/4" holes through from the backside. Works best with a drill press.
> can get about 10-15 holes in most British pedals.
> When you turn the pedal right-side up, the holes will have sharp burrs
> give great grip. Resist the temptation to smooth them off.
> This will last for years and totally resists oil and other slippery
> Jack Woehrle
> **************A Good Credit Score is 700 or Above. See yours in just 2
> Support Team.Net http://www.team.net/donate.html
> Fot mailing list
Support Team.Net http://www.team.net/donate.html
Fot mailing list