This is not the "usual" situation. There are two cracks which have grown to
the point they are on the edge of the sealing area.
I can send a picture...
From: Tony Drews
Sent: 12/23/2014 11:44 AM
To: SpiwakD@aol.com; firstname.lastname@example.org
Subject: Re: [Fot] TR head cracks
Crack between the two water passages between 2 and 3 is common and
can be ignored. It's not a sealing surface.
Cheers, Tony Drews
At 07:30 AM 12/23/2014, SpiwakD@aol.com wrote:
>I need advice on repairing some cracks on a TR4 head between #2 and 3
>cylinders. Is it common and is it a real concern? Can it be repaired?