Seems my previous message on this topic didn?t appear on FoT. An edited
version is below. Has nobody else here tried DOT 5.1?
Duncan Charlton
Texas
> On Jun 23, 2017, at 1:40 PM, Duncan Charlton <duncan.charlton54 at gmail.com>
> wrote:
>
> If I was really worried about boiling point I would use DOT 5.1, which has
> the same wet and dry minimum boiling points as DOT 5 silicone fluid (500?F
> hot and 356? wet). It is polyethylene glycol-based (it must be less than 70%
> silicone by definition) so it?s compatible with DOT 4 but it is not so easy
> to find these days. It?s a bit less viscous than DOT 3 or DOT 4, same
> viscosity as DOT 5.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170624/dbdc86b9/attachment.html>
|