fot
[Top] [All Lists]

[Healeys] Generator pulley dimensions

Subject: [Healeys] Generator pulley dimensions
From: ardmorebusiness at xtra.co.nz (Mark Donaldson)
Date: Sun, 11 Jun 2017 14:21:34 +1200
Listers,

 

Until now I'd never noticed the small differences in generator pulley
diameters.

 

What is the diameter of the pulley fitted to a Mk II tri-carb - part number
AEC 910 ?

The one presently fitted to mine is 100mm.  It does not have a part number
on it.

 

I have a 100/6 pulley with part number AEC 291 sitting on my shelf.  

It shows the part number on the casting and has a diameter of 110 mm.  (see
photo attached.)

 

As a matter of interest - could the 100/6 pulley be used on a later model
without adverse effect - bearing in mind the generator speed would be only
marginally reduced.

 

Mark

 

Ardmore

NZ

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170611/661380e8/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Generator pulleys - AEC 291 + AEC 910.JPG
Type: image/jpeg
Size: 115370 bytes
Desc: not available
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170611/661380e8/attachment.jpe>

<Prev in Thread] Current Thread [Next in Thread>