I didn?t say I wanted to race it, but since the club I race with, Vintage Racer
Group, just decided cars up through 1989 are vintage and eligible (yeesh,
frown), it should fit right in!
Brian, I would say venting might help, but only if it?s a small leak. If
you?ve got a anything more than a drop or two when the the car is stationary
and running, you?re going to have more when you?re braking, the oil sloshes up
there and it?s hot and at higher revs.
On Mar 12, 2018, at 7:14 PM, Brian Schirano via Fot <fot at autox.team.net>
wrote:
Hi Friends
Sorry about stirring the pot on vintage over Scott's post on the TR4 on BAT,
pretty nice car though I thought, competing in my dreams for the Volvo 544 with
the V8
Anywise - thinking about the oil leak coming from the front of the pan on the
GT and the high probability it's the sealing block. That said, it seems that
if I alleviate the air pressure build up in the engine I might minimize it
until I actually have another reason to pull the engine.
Has anyone ever put a PCV on the vent coming off the valve cover and hooked it
to the intake manifold? worked in the old days.
Any thoughts and comments are welcome.
Thanks
Brian
26A GT6+, 28 TR6
Brian Schirano
585-305-0349 Cell
BSchirano at yahoo.com
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180312/3a3ba4f4/attachment.html>
|