Re: Rear Springs

["davidwjones" <davidwjones@cox.net>]

Larry,

When attached and the rear suspension is unloaded, i.e.: up on jacks, the rear
axle rests heavily on the frame. On the frame there should be 2 flat
rectangular rubber buffers (1 on each side) that the axle rests on. With
weight, I think the axle lifts off the rails, but not by much! I'll send you a
photo of my BT7 axle off list.

David W. Jones
'62 Mk II BT7 tricarb
Cumberland, RI USA