I had a chance to review the wiring diagram and it appears that the
throttle switch will have to remain active. However, if I install a
momentary contact push button switch in series with the throttle switch
I can select to disengage the OD at a stop light or sign without bliping
the throttle. Anyone have thoughts on this or has anyone installed such
a switch?
Alan Schultz
67BJ8
RAHosmer@aol.com wrote:
>For highway driving where I'm expecting to just cruise at part throttle, I
>usually move the dashboard switch back to "normal" immediately after engaging
>OD. Then a simple jab on the gas will kick it down one gear whenever I want
>it.
>
>I definitely would not consider disabling the throttle switch. Also, I feel
>it is best to be out of OD before having to start up from a stop or slow
>speed,
>as I've never liked the lugging sound/feel of inadvertently going from second
>to 3rdOD.
>
>Dick Hosmer
|