healeys
[Top] [All Lists]

RE: Healey 100 Cam Specs

To: <healeys@Autox.Team.Net>
Subject: RE: Healey 100 Cam Specs
From: "Michael Salter" <michaelsalter@rogers.com>
Date: Fri, 3 Dec 2004 07:43:37 -0500
On the same subject, I'm told that the cam followers in a 100 engine can be
replaced with some sort of Buick lifter which is lighter, possibly straight
8, although longer pushrods may be required. Does anyone out there know any
more about this?

Michael Salter
www.precisionsportscar.com
 

-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of Michael Salter
Sent: Thursday, December 02, 2004 10:00 PM
To: 'Mike MacLean'; healeys@autox.team.net
Subject: RE: Healey 100 Cam Specs

This is what I have Mike.

100 cam specs:
Lift 0.390"
Timing @ 0.021" 5, 45, 40, 10
Duration 230

100M (and S) cam specs:
Lift 0.435"
Timing @ 0.021" 10, 50, 45, 15
Duration 240

IMHO cam profiling has come a long way since the days when these were
developed and there are better profiles around now.
In our Targa engine we are running 0.485" lift
Timing @ 0.021" 49, 77, 77, 49. 
Duration 306 
This engine still pulls very strongly from 1200 RPM.

Michael Salter
www.precisionsportscar.com
 

-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of Mike MacLean
Sent: Thursday, December 02, 2004 8:00 PM
To: healeys@autox.team.net
Subject: Healey 100 Cam Specs

I'd like to thank everyone for the bezel info for my BN2.  What I need 
now is cam specs for a stock 100 cam and cam specs for a 100M.  I was 
given a Healey 100 cam and we don't know what the grind on it is, but it 
is not a used cam.  David ANton at APT here in Riverside is going to 
profile this cam for me, but he needs the stock info for a Healey 100 
cam.  He also wants to know how many Healey 100s are left out there 
because he considering making cams for these cars.  Anyone know haow 
many 100s are left?
Mike MacLean  
56 BN2
60 Sprite




<Prev in Thread] Current Thread [Next in Thread>