healeys
[Top] [All Lists]

Re: BJ8 starter motor "doesn't" any more. Any tricks before I

To: AlanX@proaxis.demon.co.uk
Subject: Re: BJ8 starter motor "doesn't" any more. Any tricks before I
From: Blue One Hundred <healey.nut@gmail.com>
Date: Mon, 27 Jun 2005 22:24:11 +0800
Trick #1, always park on a downslope.  Did this in college and went
three months without having to fix the starter!

Trick #2) try cleaning the connections between the solenoid and the starter.

Otherwise you'll have to pull it out!!

Cheers,

Alan

'53 BN1 '64 BJ8

On 6/27/05, AlanX@proaxis.demon.co.uk <AlanX@proaxis.demon.co.uk> wrote:
> After apparently faultless functioning, my starter motor "doesn't". The
> solenoid clunks, and 12 volts appear on the motor side of the solenoid
> when the key is turned. The lights do not dim, so the motor is not
> taking current (and is not jammed).
> 
> Opinion here says that it could be that the brushes are totally shot, or
> just that the commutator has just landed on a dead or dirty spot. Can't
> turn anything by hand, of course. I had hoped that, after a push start
> and a long ride home, the vibration might have 'moved something', but no
> such joy.
> 
> I think, if the earth strap was open, the lights wouldn't work. Am I
> right? In which case it has to be internal to the motor (12v feed
> terminals are tight).
> 
> Any tricks to try before I remove the motor?
> 
> TIA.
> --
> Alan F Cross (BJ8 "Ginny") AHC member TV1729J
> Heathfield Studios - http://www.heathfield-studios.co.uk - web designers for 
>the
> Austin Healey Club UK - http://www.austin-healey-club.com
> 
> Your messages not reaching the list?
> Check out http://www.team.net/posting.html




<Prev in Thread] Current Thread [Next in Thread>