healeys
[Top] [All Lists]

WIRING DIAGRAM(S)

To: "Healey List" <healeys@autox.team.net>
Subject: WIRING DIAGRAM(S)
From: "Brashear, Jack, N" <JNBrashear@garverengineers.com>
Date: Tue, 6 Sep 2005 10:06:47 -0500
HI ALL, I HAVE AN ORIGINAL FACTORY SHOP MANUAL PURCHASED IN MAY, 1963
WHEN I ALSO PURCHASED MY BT7 MK2.  ANYWAY, I'M PUTTING A NEW WIRING
HARNESS IN A BN7 MK1 (WITH O.D.) FOR A GUY.  THE MANUAL STATES THAT IT
COVERS BN6 THRU BJ7, BUT THERE IS ONLY ONE SCHEMATIC IN IT.  WOULD I
EXPECT THE BN7 MK1 WIRING TO BE THE SAME AS ALL THOSE OTHERS??  THE NEW
HARNESS (FROM M+++) MATCHES THE SCHEMATIC IN MANY WAYS BUT NOT IN SOME
OTHERS.  I CAN ALWAYS TRACK DOWN THE WIRE HOOKUPS WITH AN OHM METER BUT
THAT'S A PAIN.  ALSO, THE NEW HARNESS HAS A COUPLE OF "EYE" TYPE ENDS
WHERE IT SEEMS THEY SHOULD BE SOMETHING ELSE AND, FOR EXAMPLE, THE WHITE
AND WHITE W/ PURPLE WIRES THAT ATTACH TO THE DASH O.D. SWITCH EMERGE
FROM THE BRAIDED HARNESS SO FAR APART THAT THEY CANNOT POSSIBLY ATTACH
TO THE SWITCH.  AM I MISSING SOMETHING HERE??  PLEASE HELP IF YOU CAN
AND MANY THANKS!!!
JACK




<Prev in Thread] Current Thread [Next in Thread>