healeys
[Top] [All Lists]

Re: cold start bore dilution

To: Frogeye@swcp.com, msalter@precisionsportscar.com, healeys@autox.team.net
Subject: Re: cold start bore dilution
From: Awgertoo@aol.com
Date: Sat, 22 Apr 2006 05:51:53 EDT
In a message dated 4/21/2006 9:57:20 PM Eastern Daylight Time, 
Frogeye@swcp.com writes:
My initial answer could be to add
bore "squirters" to the Healey lube system as there is sufficient room in
the block to add them.
----------------------------------------------------
Dave--

Many race cars and other applications use an Accusump 
(http://www.accusump.com/) system to prelube the engine prior to starts.  A 3 
qt. unit with automatic 
valve tied into your ignition switch would probably fit under your dash and 
give you the rest that you need.

Best--Michael Oritt, 100 Le Mans




<Prev in Thread] Current Thread [Next in Thread>