Scott,
I would not just block it off. Connect the inflow at the tap to the return
line on the other side of the engine by means of one hose and you are done.
Would also suggest that you drain the heater and hoses as best you can.
Keith Pennell
---- RAWDAWGS@aol.com wrote:
> Can I just not run the water lines to the heater? I dont need it down here
> and I seem to remember it generated heatr all the time. Does it disrupt the
> coolant flow if I just block it off at the block and return lines? SM
>
> Scott McPherson
> Lake Charles, LA
|