Hi Michael,
I would guess it means that you can't get a full stroke on the cylinder that
you are
bleeding if the other cylinder is not free to bottom also. With two hoses
attached, open
two bleed screws, & do them together.
Pressure bleeding from the MC's would allow the two systems to be done
separately.
Dave Russell
Awgertoo@aol.com wrote:
> On Tilton's website it says: "If the vehicle has a dual master cylinder
>brake system
> then both systems must be bled simultaneously".
>
> What does this mean and exactly how would one go about doing that?
>
> Best--Michael Oritt
|