healeys
[Top] [All Lists]

Re: [Healeys] bj8 seat belt installation

To: "George Haywood" <haywoodone@hotmail.com>
Subject: Re: [Healeys] bj8 seat belt installation
From: "Alan Seigrist" <healey.nut@gmail.com>
Date: Tue, 4 Sep 2007 09:53:49 +0800
George -

You have to get a little seat belt "O" or a slide bar similar to this:

http://lib.store.yahoo.net/lib/wescoperformance/3in-slidebar-wlabel.jpg

Loop the belt from the underside of the mount, through the mount hole, then
up and over the slide bar and back through the hole.  The odd shape of the
hole in the mount will then anchor the seat belt firmly for safety, but if
pushed backwards will become loose and you can adjust it.

If you want I can probably send you a picture of my installation in a couple
of days.

Good Luck!

Alan

On 9/4/07, George Haywood <haywoodone@hotmail.com > wrote:
>
> Hello listers,
>
> I'm trying to install the 3 point seat belts I bought from Moss.  How do
> the
> seat belt webbings attach to the brackets on the rear wheel well that I
> purchased from British Car specialists?  The bracket on the Moss belt has
> a
> small bar that the belt wraps around and grabs the belt when it is pulled
> forward to keep you from flying forward during deceleration.  There is no
> such bar on the BCS bracket, how do I go about securing the belt to it so
> the belt can be adjusted for different size people?
>
> Thanks for any information on this.
>
> George Haywood
> '65 bj8
>
> _________________________________________________________________
> Get a FREE small business Web site and more from Microsoft. Office Live!
> http://clk.atdmt.com/MRT/go/aub0930003811mrt/direct/01/
> _______________________________________________
> healey.nut@gmail.com
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>



-- 
Alan

'52 A90
'53 BN1
'64 BJ8
_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>