Alan,
I received the slide bars for my seat belts today. Could you please send me
pictures of your bj8 seat belt installation? It looks like I'll have to
remove the round insert in the end of the webbing to feed it through the
bracket and the slide bar, then back through the bracket. Your picture will
help quite a bit with this installation.
Thanks,
George
>From: "Alan Seigrist" <healey.nut@gmail.com>
>To: "George Haywood" <haywoodone@hotmail.com>
>CC: healeys@autox.team.net
>Subject: Re: [Healeys] bj8 seat belt installation
>Date: Tue, 4 Sep 2007 09:53:49 +0800
>
>George -
>
>You have to get a little seat belt "O" or a slide bar similar to this:
>
>http://lib.store.yahoo.net/lib/wescoperformance/3in-slidebar-wlabel.jpg
>
>Loop the belt from the underside of the mount, through the mount hole, then
>up and over the slide bar and back through the hole. The odd shape of the
>hole in the mount will then anchor the seat belt firmly for safety, but if
>pushed backwards will become loose and you can adjust it.
>
>If you want I can probably send you a picture of my installation in a
>couple
>of days.
>
>Good Luck!
>
>Alan
>
_________________________________________________________________
Gear up for Halo. 3 with free downloads and an exclusive offer.
http://gethalo3gear.com?ocid=SeptemberWLHalo3_MSNHMTxt_1
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|
