Richard,
I did this many years ago and have very good results. I used a 1.5 to 2 inch
hole saw (not sure of exact size) and drilled a 4 by 4 pattern. Not too hard,
not too soft - just right!
Keith Pennell
> Hi Group,
>
> I have new foam seats and find they are too stiff. Anyone have any
> recommendations as to where, how many and how deep the 1" holes should be to
> make the seats softer.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|