healeys
[Top] [All Lists]

Re: [Healeys] no compression 100

To: <kaynmike.bham@juno.com>, <Healeys@autox.team.net>
Subject: Re: [Healeys] no compression 100
From: "Rod Shepherd" <rodshepherd@optusnet.com.au>
Date: Tue, 3 Feb 2009 17:31:31 +1000
Mike,
Head Gasket blowing between cylinders 3 and 4 appears to be the usual
occurrence.
I strongly suggest a straight-edge check of block and the head in that area.
If you have not replaced the head bolts then I also would replace them and
retorque the head after 100 miles or so, and do it when hot.
Rod Shepherd.

-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of kaynmike.bham@juno.com
Sent: Tuesday, 3 February 2009 4:36 PM
To: Healeys@autox.team.net
Subject: [Healeys] no compression 100

Thanks for all replies.Shop is backed up, so space for the car is
limited-work
will commence in 12-14 days. Yes, head will be off as first step. Do I
understand correctly that IF the problem is a blow out between 3 and 4 a new
gasket is all that would be required, whereas if the gasket were intact I
should look further afield? (Warped/cracked head or uneven deck?) Will
verify
the operation of the valves. Do I need new bolts/nuts? Last time I had this
head off, someone said "DO NOT retork" while others said ..."a MUST @ 500
miles." What's a cabinetmaker to do?
Mike Gougeon   56 BN2
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as rodshepherd@optusnet.com.au

http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>