healeys
[Top] [All Lists]

Re: [Healeys] BN2 Gearbox

To: 'WILLIAM B LAWRENCE' <ynotink@msn.com>, healeys@autox.team.net,
Subject: Re: [Healeys] BN2 Gearbox
From: Tadeusz Malkiewicz <tadeusz.malkiewicz@plusnet.pl>
Date: Sat, 15 Aug 2009 09:54:14 +0200
Bill, Rich and others, many many thanks!

I checked the fork play at first, and here's what I found:
Large  1-2 selector: 0.5mm - the selector looks slightly worn, the outer
front face has seen contact with the synchro.
Small 3-4 selector:  0.6mm - no severe wear
Reverse selector:    0.85mm - no wear.

When reverse is engaged, the distance between the reverse shaft holder (with
the bolt) and the gear itself is 4.65mm.
Does anyone perhaps has the gearbox open to check these measurements?..

Many thanks, Tadek
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>