healeys
[Top] [All Lists]

Re: [Healeys] Trailering/AAA Flatbed Danger

To: healey list <healeys@autox.team.net>
Subject: Re: [Healeys] Trailering/AAA Flatbed Danger
From: Charlie Baldwin <mgcharlie@comcast.net>
Date: Mon, 23 Nov 2009 20:54:34 -0500
My experience with a Jerr-Dan has two problems.  At the front the chains 
will come into contact with the front shroud if they are hooked around 
the bottom spring perch on each side.  Using foam rubber pipe insulation 
over the chains will help to protect it.  Better yet, installing towing 
eyes like Bill Bolton and others supply and pulling on those will not 
even let them get close.
At the rear, the tailpipes (BT7) will scrape and the license plate will 
get bent unless a ramp is made with 2 x 8's or 10's to raise the rear a 
bit right before it hits the aluminum bed.  The more laden they are with 
drive train and such, the more they will be a problem.
A friend of mine has the Jerr-Dan and has transported several Healeys to 
and from lister Shawn Miller's shop.
Charlie

Mark LaPierre wrote:
> What did Hagerty say when you asked them about using a particular 
> flatbed company when the
> time comes.   Its not uncommon at all for the towing to be handled 
> like AAA did,  sorry to say.
> The closest is the cheapest for them.
>
> I have tailored my Healey twice so far and it seems like those flat 
> beds can extend pretty
> far back to accommodate our low risers.   But like everything else  
> there is bound to be
> different styles out there.
>
> Mark

[demime 1.01d removed an attachment of type text/x-vcard which had a name of 
mgcharlie.vcf]
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>