Rob,
Many thanks for the tip. Especially helpful since likely not to have all
right hole punch sizes.
Tom
On 4/24/10 2:18 PM, "robert westcott" <55healey@comcast.net> wrote:
> A good sharp exacto knife works well once it's in place, just carve
> around the inside of the edge of the hole.
>
> Rob
>
> On Apr 24, 2010, at 8:29 AM, Thomas Morrione wrote:
>
>> I hope that a friend in an art supply store's right saying paper hole
>> punches he has will work -- if not, you're right -- lot's of
>> patience. I've
>> never worked with Dynamat before. Am inspired by Dynamat use and
>> restoration
>> pix of "Andy's Healey" at
>>
>> http://www.austin-healey3000.com/interior.htm
>>
>> Tom
>>
>> On 4/24/10 7:16 AM, "Mark LaPierre" <lapierrem@sbcglobal.net> wrote:
>>
>>> How do you in tend on cutting all those holes in the gooey
>>> Dynamat. Thats
>>> gonna take some patience.
>>>
>>> Sounds like it would give good heat and sound protection though.
>>>
>>> Mark
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/tjmorrio@colby.edu
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|