Steve,
There is a Loctite product specifically for this purpose.
Rich
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Stephen Hutchings
Sent: Tuesday, March 22, 2011 2:40 PM
To: healeys@autox.team.net
Subject: [Healeys] Redi-sleeve install
I'm putting a redi-sleeve over the rear axle shaft where the oil seal
rides, and the instructions say to use a non-hardening sealant inside
the sleeve before sliding it over the shaft. I thought of using
Hylomar, but I thought I'd heard somewhere that people used lock-tite
in this application.
What does the collective wisdom of the list say?
Stephen, BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|