Keith--probably the brake switch is sticking shut. To confirm, jump the two
switch terminals and turn on the ignition. You should get your brake lights
without touching the brake pedal. Disconnect the jumper. Brake lights
should go out. John Trifari Golden Gate AHC.
-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at
autox.team.net]
On Behalf Of pennell at cox.net
Sent: Sunday, May 29, 2011 4:32 PM
To: healeys at autox.team.net
Subject: [Healeys] Brake lights on
Listers,
Need some ideas on the solution to my problem. Recently the brake lights on
my BN7 will come on when the brake is applied and not go off. If the
ignition is turned off they will sometimes stay off and sometimes not. The
green-purple wire from the brake lights switch runs to terminal #5 on the
relay. With no brake lights I read no voltage there but once the pedal is
applied there is voltage. However, the voltage stays after the pedal is
released as do the lights. Are we looking at a faulty brake light switch
here or what?
Any thoughts?
Keith
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jtrifari at comcast.net
|