BT7 pinion shaft appears to be 16 TPI. Thread gauges are cheap. There
are at least two thread restoration files available and each one that
I have has 16 TPI.
John
At 08:19 AM 7/20/2011 -0700, Bob Brown wrote:
>List,
>Attempting to replace the oil seal on the BJ8 pinion shaft, the threads
>on the
>shaft have been damaged. Does anyone know the size and thread of the
>shaft so we
>can clean up the threads? We have tried a new nut but still can't
>get the nut on
>the shaft.
>Bob
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|