healeys
[Top] [All Lists]

Re: [Healeys] Wire wheel hubs - how?

To: <healeys@autox.team.net>
Subject: Re: [Healeys] Wire wheel hubs - how?
From: "BJ8 Healeys" <sbyers@ec.rr.com>
Date: Thu, 21 Jul 2011 13:00:06 -0400
Yes, I did this for years, and replaced the marks every time I reinstalled a
knockoff.  I quit doing it because the knockoff ALWAYS tightened itself more
while driving, no matter how tight I got it to start with.  I have also
ALWAYS lubricated the wheel/hub splines and the threads of the hub and
knockoff at least once a year.  In 26 years and over 100K miles, I have
never had a knockoff loosen itself.

Steve Byers
HBJ8L/36666     
BJ8 Registry
Havelock, NC  USA



-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Greg Lemon
Sent: Wednesday, July 20, 2011 9:36 PM
Cc: healeys@autox.team.net
Subject: Re: [Healeys] Wire wheel hubs - how?


Has anyone ever put a mark on the knock off and wheel when they have 
tightened down "good and hard" to see if the self tightening still occurs?
_______________________________________________
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>