healeys
[Top] [All Lists]

[Healeys] Wire wheel hubs - how?

Subject: [Healeys] Wire wheel hubs - how?
From: ahbn6 at verizon.net (John Sims)
Date: Thu, 21 Jul 2011 11:28:14 -0400
References: <1311123027.45240.YahooMailClassic@web30307.mail.mud.yahoo.com>
You can also find a more complete explanation here:

http://www.vtr.org/maintain/wire-wheels-tightening.shtml

Also a link to this paper on my site in the Safety Section of the Technical
page.

John Sims, BN6
Aberdeen, NJ
 
http://www.healey6.com


-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at 
autox.team.net]
On Behalf Of J. Scott Morris
Sent: Tuesday, July 19, 2011 8:50 PM
To: Austin Healey; healeys at autox.team.net
Subject: Re: [Healeys] Wire wheel hubs - how?

Hi Gergo;  Back in 2005 Michael Salter provided a reference to the original
patent for how the knock off hubs work.  A copy is attached or you can check
it out at the following website:
http://v3.espacenet.com/textdoc?DB=EPODOC&IDX=GB436258&F=0

At that website you should be able to access one of Rudge Whitworth's
patents
applicable to detachable road wheels.    There is a patent which describes
the
self tightening mechanism.

Enjoy!!

<Prev in Thread] Current Thread [Next in Thread>