Re: [Healeys] Clutch/Release/Pressure Plate Questions <mailto:healeys-request@autox.team.net?subject=unsubscribe> <mailto:healeys-request@autox.team.net?subject=subscribe>

[Per Schoerner <healeyguy@bredband.net>]

Hi
Alan is right, of course everything can be modified. What I meant was 
that the unmodified BJ8 clutch fits only to the unmodified BJ8 flywheel. 
And I may remember incorrectly, the dowel pattern may possibly be the 
only difference.

Per

Alan Seigrist skrev 2012-09-07 05:31:
> If the dowels line up to your clutch cover, then the flywheel is
> correct.  Otherwise there is no material difference.  Even if the
> dowels don't match, alot of the times, you can reposition them at a
> machine shop because the bolt patterns are the same.
_______________________________________________
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys