healeys
[Top] [All Lists]

Re: [Healeys] bending exhaust down pipes

To: jmsdarch@sbcglobal.net, Jackson Krall <jackson_krall@yahoo.com>
Subject: Re: [Healeys] bending exhaust down pipes
From: David Lodge <emmgeeteecee@yahoo.co.uk>
Date: Sun, 11 Nov 2012 20:06:36 +0000 (GMT)
Cc: healeys@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
There's an article somewhere that tells you to avoid kinks by filling the pipe
with dry sand.  Haven't tried it myself but it's probably Googleable.
Regards, D

--- On Fri, 9/11/12, Jackson Krall <jackson_krall@yahoo.com> wrote:

From: Jackson Krall <jackson_krall@yahoo.com>
Subject: Re: [Healeys] bending exhaust down pipes
To: jmsdarch@sbcglobal.net
Cc: healeys@autox.team.net
Date: Friday, 9 November, 2012, 17:26

Hello John, I have zero experiance with bending machines but there is a
procedure done w/OA torch called a wrincle bend that might be more
controlable. Make a red hot ring around pipe at the place you want the bend,
place the pipe in a vise or other leveragable position and give it a yank in
direction of needed bend. A slight bulge will appear on inside radius but not
a kink. If more bend is needed, heat another ring next to first and repeat,
etc. I've made decent looking 900 bends this way, not unlike store bought
pipes that have bends with a washboard look.
Best
JK

------------------------------
On Thu, Nov 8, 2012 11:23 PM EST john spaur wrote:

>I need to adjust my pre-shaped exhaust down pipes and I have access to a
hydraulic pipe bender. I have experimented a little and when I bend a pipe it
does not seem to go in the direction I would expect it to go.
>
>Are there any trade secrets or tricks to figuring out how to get a pipe bent
a few degrees in a predictable direction?
>
>Thank you,
>
>John Spaur
>San Jose, CA
>_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

http://autox.team.net/mailman/options/healeys/emmgeeteecee@yahoo.co.uk
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>