What he said, otherwise you will wish you had.
Don 57' BN4
--- Original Message ---
From: "Oudesluys" <coudesluijs@chello.nl>
Sent: September 29, 2014 9:48 AM
To: healeys@autox.team.net
Subject: Re: [Healeys] Fast Flow Inlet Manifold
Well, don't.
Waste of money if you do not go the whole hug.
Kees Oudesluijs
Rick Swain schreef op 29-9-2014 14:54:
> Does anyone have any experience with the "Fast Flow Inlet Manifold" listed
as
> a new product by Moss Motors? I believe it's the manifold that Rawles
> Motorsport in the UK says they developed. I've always thought the stock
> manifold looked pretty inefficient. The Moss site suggests this manifold
> performs best with 2" HD8 carbs and a six branch exhaust header but that it
> can be used with 1 3/4" carbs and the stock cast exhaust manifold. Since I
> have freshly rebuilt HD6s and a basically stock 100 Six engine (except for
a
> BJ8 cam grind), I'm interested in the latter route. Comments or
suggestions?
> Thanks
> Rick'59 BN4
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2014.0.4765 / Virusdatabase: 4025/8291 - datum van uitgifte:
09/29/14
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/healey100s@live.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|