Thanks. I know they are pricey. So is AH spares. If that is the best route,
then that is where I will order. Not sure where I could find 3000 discs to
bolt up.
Sent from my iPhone
Chris Scholz OD
> On Nov 26, 2014, at 1:34 PM, "Don Anglesey" <healey100s@live.com> wrote:
>
> I used Dennis Welch on my 57' 100-6 and am very satisfied with their
conversion kit.
> Don
>
> --- Original Message ---
>
> From: "Chris Scholz" <drscholz@visioncenterpc.com>
> Sent: November 26, 2014 12:14 PM
> To: "healeys" <healeys@autox.team.net>
> Subject: [Healeys] 1959 100-6 front disc brake conversion
>
> Greetings,
>
> I am looking for advice on converting my front drums to discs. Keeping my
wire
> wheels. Any vendor? I see some use Willwood discs. Who makes the brackets?
I
> will also have rear discs with a narrowed after-market rear end and have to
> figure out some kind of proportioning valve. Thanks.
>
> Sent from my iPhone
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey100s@live.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|