I couldn't find proper size and 8 sided socket and had one made at a local
machine shop. I did this back in '73 - '74. It was somewhat costly but worked
out great and I didn't have to use hammer and punch.
Sent from my iPhone
> On Sep 6, 2017, at 8:31 AM, John Sims <ahbn6 at verizon.net> wrote:
>
> I have a hub nut socket for an 8 sided axle nut but the measurement stamped
> on it is 2 13/64 which is very close to 2 3/16. It is for sale.
>
> John Sims
> Aberdeen, NJ
>
> www.healey6.com
>
> From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Michael
> MacLean
> Sent: Tuesday, September 05, 2017 9:29 PM
> To: Healey List
> Subject: [Healeys] 2 3/16 Hub Nut Socket
>
> Where can I get a 2 3/16th hub nut socket for the 8 sided axle nut? I also
> understand this nut should be torqued down to 180+ ftlb of torque.
> Mike MacLean
>
> Sent from Yahoo Mail on Android
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/cjerryadams
> at yahoo.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170906/8fc32ff8/attachment.html>
|