healeys
[Top] [All Lists]

Re: [Healeys] Four cylinder woes, part two!

To: Kees Oudesluijs <coudesluijs@chello.nl>, "healeys@autox.team.net" <healeys@autox.team.net>
Subject: Re: [Healeys] Four cylinder woes, part two!
From: WILLIAM B LAWRENCE <ynotink@msn.com>
Date: Fri, 13 Mar 2020 18:46:21 +0000
Accept-language: en-US
Arc-authentication-results: i=1; mx.microsoft.com 1; spf=none; dmarc=none; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=Ub4in4B9b76HB5dfXgRPSXGlAXCOc/R6YISAnJ/Q+4o=; b=N1z/P90nJGUJfRIxE5JyC6s1HKk0xBO62FMPzOOg+xp/CSqfkYmxIrA0Cyi8LElQM/wqfQFsc7iUoxvNcyLVZnJXNDgZ1qfjLyMYV9tNxEvIfX0ZkycYHfDYqiNqkkFLZ7TTehpktlZ09UKnjl928V1uptnSCt9MfqZ5rwG6runzS9bJkcO/0aTH2IKRel/JFC0jEwxRiAQdBFGNYbMAGENWeAMUCxZQgVi8kaJsmqhygPjYfdmaXiSNyxqxqfTCI02m3YcWjDm3DO8QN0JVtEUXW5IS24BR35N0U/KhGC7BX8EfPtUJYUCcwOJHssEbC6D+O9EA3xTVyVs04gxyKg==
Arc-message-signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=Ub4in4B9b76HB5dfXgRPSXGlAXCOc/R6YISAnJ/Q+4o=; b=junRjJoypc30mJORr+iDbJ3cBy7Ml+qs1m1AcIKALbMmfM/dDV+2BpMOdSeHWCjKtLKONA8fSh6p5Vs9An/NMufdNyzPLxkc0vk+j7yGkytNYj+oAs2kWlk/4xvy1djcb74MjjJgrCvp71PrujjROmuMzPRKgf0QtnAWqE2j6iZdblSe8sDueha9Jr09vVw0zSb3sLCKDqj7jr4Wyn5UqFt5vddoM80bUK/bHSVaSSUbf0fTMKIrUKPAkFjoBKgpBfgrkrWE789I8J3eKYcmys3SHMfAt9iHz1v1ksjyaq2WSvS4mdoE6QAOLNApWbRTPg3iPBNb0cKvb7akJ84lpw==
Arc-seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=n8/7kIkClZ/W61CbNfq8vxElG2KC+omq1MiKxvNEB+oQM8pbLx3U5pThKNx+CW5hWI1HqaMFQXQv/cqkdiLZnfITB9xoJuya15tiUPqc8Wr107HkLcxbywTNnIIoS56wK5g3tCPwgvUWDJanFTMW/9QOawyjYlZz80i2RSFr+0FRAeRSdpGDmaIFob9CW3eTLUzliSXgn2iZLV7B8O2WCbOHuwfOdXGOn0WBN7ZZ/9zxSHpwPJGq759HlLRkU4aeQjQU+ZrqB0tYaDEZqdHvWNNn/wADfiRGS1Qzrqt2zAY0GJKHB7vx68jD28fm06Wf88pyGKdwuBccFdRxDWFErQ==
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <7215b72b-f257-4926-962d-1c03ef7fdd55@me.com>, <6fad2343-bfb8-9086-8662-f59ad3921966@chello.nl>
Thread-index: AQHV+MYcjLsmaUkoKUuy/GP+rmLoVKhGLq0AgACtuKw=
Thread-topic: [Healeys] Four cylinder woes, part two!
--===============5943909369765488015==
Content-Language: en-US
        boundary="_000_CY4PR07MB34327347951C4CE8ACE21C35A5FA0CY4PR07MB3432namp_"

--_000_CY4PR07MB34327347951C4CE8ACE21C35A5FA0CY4PR07MB3432namp_
Content-Transfer-Encoding: quoted-printable

Another consideration is whether you have bronze valve guides in an iron he=
ad. These can cause problems due to the different thermal expansion rates o=
f the materials. The iron can crush the bronze and cause the valve to stick=
.

Bill Lawrence
BN1 #554
________________________________
From: Healeys <healeys-bounces@autox.team.net> on behalf of Kees Oudesluijs=
 <coudesluijs@chello.nl>
Sent: Friday, March 13, 2020 8:19:28 AM
To: healeys@autox.team.net <healeys@autox.team.net>
Subject: Re: [Healeys] Four cylinder woes, part two!


Measure the bores in several places first. If no significant wear is appare=
nt leave the pistons and rings well alone. Also look for ridges near the to=
p of the bores. If they are not present, wear is not very likely. If the bo=
res are fine, piston ring wear is not likely. Valves do rock a bit in the g=
uides. They need to, they expand in the guides when the engine is running. =
You may or may not use cap seals on the valve guides.

If there is wear in the cylinders however have the block rebored and fit ne=
w pistons and rings

Burning some oil is nothing to worry about on the old engines. When new 1lt=
r per 1000km (about 1 qrt per 500mls) was quite permissible (after running =
in during which oil consumption could be much higher). Check the crank case=
 ventilation system, when dirty/blocked it can be a cause of considerable o=
il consumption. Anyway you probably loose most oil leaking. Overfilling the=
 sump is another cause of oil consumption as excessive oil will be expelled=
 through the crank case ventilation system

The head should be dead straight but the surface does not need to be super =
smooth. In most causes you can see feel the milling marks.

Replacing the bearing shells and seals is good practice if the bottom end c=
omes apart. Does not cost an arm and a leg and if in time you will save on =
grinding the crankshaft. Measure the crank pins in various places and check=
 if these are within limits.

Kees Oudesluijs


Op 13-3-2020 om 00:29 schreef Steven Kingsbury via Healeys:
Latest update, took the head to a friend's machine shop and took the valves=
 out. All the intake vales had build up of soft carbon, a sign of burning o=
il I was told and I'm going to have to also pull the pistons to redo the ri=
ngs. Fun, but I'm here, so why not? I'm also going to get new valve guides =
pressed in and replace the ones in the head as the valves seem to rock a bi=
t going up and down. The head though is not warped and is straight, but I w=
ill get it checked out for cracks and resurface the head to make it super s=
mooth.
   I'm also going to drop the pan, and push the pistons out of the block an=
d replace the rings. And yes, I will plastiguage the crank to make sure it'=
s in good shape and install new rod bearings when in there.
   I am also going to remove the tappet cover and take a good, hard, close =
up look at all the lifters to make sure that's not a problem. Right now, in=
 for a penny, in for a pound. Sterling that is.
   Basically, I'm making sure everything is correct this time and then I wi=
ll have no one but me to blame if it doesn't work. But all in all, it seems=
 pretty simple. So stay tuned for further updates as they happen.
   Thanks for all the input, suggestions and guesses. This is actually quit=
e the fun project.
Steven Kingsbury


On March 12, 2020 at 12:38 PM, John Harper <ah100register@gmail.com><mailto=
:ah100register@gmail.com> wrote:

Hank

The fact that number 2 exhaust valve is not the same colour as the others m=
ight be a clue. Maybe it is not closing fully? It would be worth checking f=
or a stuck valve guide, broken spring or just lost  clearance. A partially =
seized rocker is possible but not likely. This may not be the problem but i=
t would not take much effort to pull the valve out and check for any burnin=
g on the working face.

Best regards

et>> wrote:
Hi Steven-good to hear from you!

That's a nice test, but I would magnaflux the head for cracks between 2-3 a=
nd have it shaved flat..could be a head gasket leak due to warped head...es=
pecially if valves and rings checked good.

Also, I don't recommend  NGK plugs- use Champion N-5...maybe cause of carbo=
n on valves. Unless cam is flat, valve spring broken or tappet rods bent/br=
oken, problem is in head-block fit.

Regards, Hank Leach



-----------------------------------------

From: "Steven Kingsbury via Healeys"
Cc:
Sent: Thursday March 12 2020 9:40:25AM
Subject: [Healeys] Four cylinder woes, part two!

Okay, here's the latest! I finally got to pull my head If you remember, I h=
ad 155 lbs of pressure in cylinders 1, 3, and 4 and only 25 lbs in cylinder=
 number two. So with the head off, I was prepared to find a problem with I =
flipped it over to expose the valves, no such luck. Other than number two e=
xhaust valve being a bit black, no cracks, nothing stuck and it looked fine=
. So then I went to look into the cylinders themselves, walls smooth, flat =
high compression pistons smooth, number three a bit rough on the top, but o=
ther than that and good.
   So then I went back to the head, put the spark plugs back in and filled =
the combustion chambers with paint thinner to see where it would leak out. =
Filled each chamber evenly and waited. Twelve hours later, and other than e=
vaporation, no leaks! All chambers still even in their fluid retention.
   So then I rotated the crank to get all the pistons to an almost even pos=
ition and put paint thinner in the cylinders at the same depth. No quick le=
ak, not one cylinder faster than the others and all the fluid finally drain=
ed out smoothly and evenly in each cylinder.
   I'm a bit stumped. My next step is taking the head to a guy in town, an =
old machinist who builds his own engines and runs his car at Bonneville in =
the 300 mph range. He knows what he's doing and I'm sure he will give me so=
me sage advice and help. Also as a side note, I went over the head with a m=
agnifying glass and can see now cracks, but that doesn't mean they are not =
there I know. I was just thinking with a 100 pound plus difference, somethi=
ng would be obvious.
   I am also going to be taking off the tappet cover on the side, inspect a=
ll the lifters and see what I can find there. Like I said, I'm a bit perple=
xed, but I'm not done. I will find something wrong! Here are some photos fo=
r you, maybe you can see something I can't.

[IMG_20200311_143602.jpg]
Here's the head, upside down and you can see the exhaust valve on number tw=
o is blacker than the others, but no cracks, chips, or visible damage.
[IMG_20200311_172123.jpg]
And here's the fluid I placed in the combustion chambers. It didn't drain o=
ut and just sat there.


_______________________________________________

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archiv=
e

http://autox.team.net/mailman/listinfo/healeys

ster@gmail.com



--
Best wishes

John Harper

AHC UK 100 Register Secretary



_______________________________________________

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archiv=
e

http://autox.team.net/mailman/listinfo/healeys

js@chello.nl



--_000_CY4PR07MB34327347951C4CE8ACE21C35A5FA0CY4PR07MB3432namp_
Content-Transfer-Encoding: quoted-printable

<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"=
>
</head>
<body>
Another consideration is whether you have bronze valve guides in an iron he=
ad. These can cause problems due to the different thermal expansion rates o=
f the materials. The iron can crush the bronze and cause the valve to stick=
.<br>
<br>
Bill Lawrence<br>
BN1 #554<br>
<hr style=3D"display:inline-block;width:98%" tabindex=3D"-1">
<div id=3D"divRplyFwdMsg" dir=3D"ltr"><font face=3D"Calibri, sans-serif" st=
yle=3D"font-size:11pt" color=3D"#000000"><b>From:</b> Healeys &lt;healeys-b=
ounces@autox.team.net&gt; on behalf of Kees Oudesluijs &lt;coudesluijs@chel=
lo.nl&gt;<br>
<b>Sent:</b> Friday, March 13, 2020 8:19:28 AM<br>
<b>To:</b> healeys@autox.team.net &lt;healeys@autox.team.net&gt;<br>
<b>Subject:</b> Re: [Healeys] Four cylinder woes, part two!</font>
<div>&nbsp;</div>
</div>
<div>
<p>Measure the bores in several places first. If no significant wear is app=
arent leave the pistons and rings well alone. Also look for ridges near the=
 top of the bores. If they are not present, wear is not very likely. If the=
 bores are fine, piston ring wear
 is not likely. Valves do rock a bit in the guides. They need to, they expa=
nd in the guides when the engine is running. You may or may not use cap sea=
ls on the valve guides.
<br>
</p>
<p>If there is wear in the cylinders however have the block rebored and fit=
 new pistons and rings<br>
</p>
<p>Burning some oil is nothing to worry about on the old engines. When new =
1ltr per 1000km (about 1 qrt per 500mls) was quite permissible (after runni=
ng in during which oil consumption could be much higher). Check the crank c=
ase ventilation system, when dirty/blocked
 it can be a cause of considerable oil consumption. Anyway you probably loo=
se most oil leaking. Overfilling the sump is another cause of oil consumpti=
on as excessive oil will be expelled through the crank case ventilation sys=
tem<br>
</p>
<p>The head should be dead straight but the surface does not need to be sup=
er smooth. In most causes you can see feel the milling marks.</p>
<p>Replacing the bearing shells and seals is good practice if the bottom en=
d comes apart. Does not cost an arm and a leg and if in time you will save =
on grinding the crankshaft. Measure the crank pins in various places and ch=
eck if these are within limits.<br>
</p>
<p>Kees Oudesluijs</p>
<p><br>
</p>
<div class=3D"x_moz-cite-prefix">Op 13-3-2020 om 00:29 schreef Steven Kings=
bury via Healeys:<br>
</div>
<blockquote type=3D"cite">
<div>Latest update, took the head to a friend's machine shop and took the v=
alves out. All the intake vales had build up of soft carbon, a sign of burn=
ing oil I was told and I'm going to have to also pull the pistons to redo t=
he rings. Fun, but I'm here, so
 why not? I'm also going to get new valve guides pressed in and replace the=
 ones in the head as the valves seem to rock a bit going up and down. The h=
ead though is not warped and is straight, but I will get it checked out for=
 cracks and resurface the head to
 make it super smooth.</div>
<div>&nbsp;&nbsp;&nbsp;I'm also going to drop the pan, and push the pistons=
 out of the block and replace the rings. And yes, I will plastiguage the cr=
ank to make sure it's in good shape and install new rod bearings when in th=
ere.&nbsp;</div>
<div>&nbsp;&nbsp;&nbsp;I am also going to remove the tappet cover and take =
a good, hard, close up look at all the lifters to make sure that's not a pr=
oblem. Right now, in for a penny, in for a pound. Sterling that is.</div>
<div>&nbsp;&nbsp;&nbsp;Basically, I'm making sure everything is correct thi=
s time and then I will have no one but me to blame if it doesn't work. But =
all in all, it seems pretty simple. So stay tuned for further updates as th=
ey happen.</div>
<div>&nbsp;&nbsp;&nbsp;Thanks for all the input, suggestions and guesses. T=
his is actually quite the fun project.</div>
<div>Steven Kingsbury</div>
<div>&nbsp; &nbsp;&nbsp;</div>
<div><br>
On March 12, 2020 at 12:38 PM, John Harper <a class=3D"x_moz-txt-link-rfc23=
96E" href=3D"mailto:ah100register@gmail.com";>
&lt;ah100register@gmail.com&gt;</a> wrote:<br>
<br>
</div>
<div>
<blockquote type=3D"cite">
<div class=3D"x_msg-quote">
<div dir=3D"ltr">Hank
<div><br>
</div>
<div>The fact that number 2 exhaust valve&nbsp;is not the same colour as th=
e others might be a clue. Maybe it is not closing fully? It would be worth =
checking for a stuck valve guide, broken spring or just lost&nbsp; clearanc=
e. A partially seized rocker is possible but
 not likely. This may not be the problem but it would not take much effort =
to pull the valve out and check for any burning on the working face.</div>
<div><br>
</div>
<div>Best regards</div>
</div>
<br>
<div class=3D"x_gmail_quote">
<div dir=3D"ltr" class=3D"x_gmail_attr">On Thu, 12 Mar 2020 at 18:18, &lt;<=
a href=3D"mailto:gradea1@charter.net";>gradea1@charter.net</a>&gt; wrote:<br=
>
</div>
<blockquote class=3D"x_gmail_quote" style=3D"margin:0px 0px 0px
                0.8ex; border-left:1px solid #cccccc; padding-left:1ex">
<div>Hi Steven-good to hear from you!
<p>That's a nice test, but I would magnaflux the head for cracks between 2-=
3 and have it shaved flat..could be a head gasket leak due to warped head..=
.especially if valves and rings checked good.</p>
<p>Also, I don't recommend&nbsp; NGK plugs- use Champion N-5...maybe cause =
of carbon on valves. Unless cam is flat, valve spring broken or tappet rods=
 bent/broken, problem is in head-block fit.</p>
<p>Regards, Hank Leach<br>
<br>
</p>
<div><br>
</div>
<p>-----------------------------------------</p>
From: &quot;Steven Kingsbury via Healeys&quot; <br>
To: <a href=3D"mailto:healeys@autox.teamnet";>healeys@autox.teamnet</a><br>
Cc: <br>
Sent: Thursday March 12 2020 9:40:25AM<br>
Subject: [Healeys] Four cylinder woes, part two!<br>
<br>
<div>
<div style=3D"color:#000000; font-family:SFNSText,'Helvetica Neue',Helvetic=
a,sans-serif; font-size:15px; font-style:normal; font-variant-ligatures:nor=
mal; font-variant-caps:normal; font-weight:300; letter-spacing:normal; text=
-align:start; text-indent:0px; text-transform:none; white-space:normal; wor=
d-spacing:0px; text-decoration-style:initial; text-decoration-color:initial=
">
Okay, here's the latest! I finally got to pull my head If you remember, I h=
ad 155 lbs of pressure in cylinders 1, 3, and 4 and only 25 lbs in cylinder=
 number two. So with the head off, I was prepared to find a problem with I =
flipped it over to expose the valves,
 no such luck. Other than number two exhaust valve being a bit black, no cr=
acks, nothing stuck and it looked fine. So then I went to look into the cyl=
inders themselves, walls smooth, flat high compression pistons smooth, numb=
er three a bit rough on the top,
 but other than that and good.</div>
<div style=3D"color:#000000; font-family:SFNSText,'Helvetica Neue',Helvetic=
a,sans-serif; font-size:15px; font-style:normal; font-variant-ligatures:nor=
mal; font-variant-caps:normal; font-weight:300; letter-spacing:normal; text=
-align:start; text-indent:0px; text-transform:none; white-space:normal; wor=
d-spacing:0px; text-decoration-style:initial; text-decoration-color:initial=
">
&nbsp;&nbsp;&nbsp;So then I went back to the head, put the spark plugs back=
 in and filled the combustion chambers with paint thinner to see where it w=
ould leak out. Filled each chamber evenly and waited. Twelve hours later, a=
nd other than evaporation, no leaks! All chambers
 still even in their fluid retention.&nbsp;</div>
<div style=3D"color:#000000; font-family:SFNSText,'Helvetica Neue',Helvetic=
a,sans-serif; font-size:15px; font-style:normal; font-variant-ligatures:nor=
mal; font-variant-caps:normal; font-weight:300; letter-spacing:normal; text=
-align:start; text-indent:0px; text-transform:none; white-space:normal; wor=
d-spacing:0px; text-decoration-style:initial; text-decoration-color:initial=
">
&nbsp;&nbsp;&nbsp;So then I rotated the crank to get all the pistons to an =
almost even position and put paint thinner in the cylinders at the same dep=
th. No quick leak, not one cylinder faster than the others and all the flui=
d finally drained out smoothly and evenly in each
 cylinder.&nbsp;</div>
<div style=3D"color:#000000; font-family:SFNSText,'Helvetica Neue',Helvetic=
a,sans-serif; font-size:15px; font-style:normal; font-variant-ligatures:nor=
mal; font-variant-caps:normal; font-weight:300; letter-spacing:normal; text=
-align:start; text-indent:0px; text-transform:none; white-space:normal; wor=
d-spacing:0px; text-decoration-style:initial; text-decoration-color:initial=
">
&nbsp;&nbsp;&nbsp;I'm a bit stumped. My next step is taking the head to a g=
uy in town, an old machinist who builds his own engines and runs his car at=
 Bonneville in the 300 mph range. He knows what he's doing and I'm sure he =
will give me some sage advice and help. Also as
 a side note, I went over the head with a magnifying glass and can see now =
cracks, but that doesn't mean they are not there I know. I was just thinkin=
g with a 100 pound plus difference, something would be obvious.&nbsp;</div>
<div style=3D"color:#000000; font-family:SFNSText,'Helvetica Neue',Helvetic=
a,sans-serif; font-size:15px; font-style:normal; font-variant-ligatures:nor=
mal; font-variant-caps:normal; font-weight:300; letter-spacing:normal; text=
-align:start; text-indent:0px; text-transform:none; white-space:normal; wor=
d-spacing:0px; text-decoration-style:initial; text-decoration-color:initial=
">
&nbsp;&nbsp;&nbsp;I am also going to be taking off the tappet cover on the =
side, inspect all the lifters and see what I can find there. Like I said, I=
'm a bit perplexed, but I'm not done. I will find something wrong! Here are=
 some photos for you, maybe you can see something
 I can't.</div>
<div style=3D"color:#000000; font-family:SFNSText,'Helvetica Neue',Helvetic=
a,sans-serif; font-size:15px; font-style:normal; font-variant-ligatures:nor=
mal; font-variant-caps:normal; font-weight:300; letter-spacing:normal; text=
-align:start; text-indent:0px; text-transform:none; white-space:normal; wor=
d-spacing:0px; text-decoration-style:initial; text-decoration-color:initial=
">
<br>
</div>
<div style=3D"color:#000000; font-family:SFNSText,'Helvetica Neue',Helvetic=
a,sans-serif; font-size:15px; font-style:normal; font-variant-ligatures:nor=
mal; font-variant-caps:normal; font-weight:300; letter-spacing:normal; text=
-align:start; text-indent:0px; text-transform:none; white-space:normal; wor=
d-spacing:0px; text-decoration-style:initial; text-decoration-color:initial=
">
<img alt=3D"IMG_20200311_143602.jpg" title=3D"IMG_20200311_143602.jpg" styl=
e=3D"margin:10px 10px 10px 0px" src=3D"http:///index.php/inbox/attachment/f=
ilenameOriginal/IMG_20200311_143602.jpg/filenamefs/INBOX37806df7c51cc87def1=
2df6be1eff39641fa0"></div>
<div style=3D"color:#000000; font-family:SFNSText,'Helvetica Neue',Helvetic=
a,sans-serif; font-size:15px; font-style:normal; font-variant-ligatures:nor=
mal; font-variant-caps:normal; font-weight:300; letter-spacing:normal; text=
-align:start; text-indent:0px; text-transform:none; white-space:normal; wor=
d-spacing:0px; text-decoration-style:initial; text-decoration-color:initial=
">
Here's the head, upside down and you can see the exhaust valve on number tw=
o is blacker than the others, but no cracks, chips, or visible damage.</div=
>
<div style=3D"color:#000000; font-family:SFNSText,'Helvetica Neue',Helvetic=
a,sans-serif; font-size:15px; font-style:normal; font-variant-ligatures:nor=
mal; font-variant-caps:normal; font-weight:300; letter-spacing:normal; text=
-align:start; text-indent:0px; text-transform:none; white-space:normal; wor=
d-spacing:0px; text-decoration-style:initial; text-decoration-color:initial=
">
<img alt=3D"IMG_20200311_172123.jpg" title=3D"IMG_20200311_172123.jpg" styl=
e=3D"margin:10px 10px 10px 0px" src=3D"http:///index.php/inbox/attachment/f=
ilenameOriginal/IMG_20200311_172123.jpg/filenamefs/INBOX378063dbbf369419c08=
43730f10637ee2493c"></div>
<div style=3D"color:#000000; font-family:SFNSText,'Helvetica Neue',Helvetic=
a,sans-serif; font-size:15px; font-style:normal; font-variant-ligatures:nor=
mal; font-variant-caps:normal; font-weight:300; letter-spacing:normal; text=
-align:start; text-indent:0px; text-transform:none; white-space:normal; wor=
d-spacing:0px; text-decoration-style:initial; text-decoration-color:initial=
">
And here's the fluid I placed in the combustion chambers. It didn't drain o=
ut and just sat there.</div>
</div>
<p><br>
</p>
</div>
_______________________________________________<br>
Support <a href=3D"http://Team.Net";>Team.Net</a> <a href=3D"http://www.team=
.net/donate.html">
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys";>http://www.team.=
net/pipermail/healeys</a>
<a href=3D"http://autox.team.net/archive";>http://autox.team.net/archive</a>=
<br>
<br>
<a href=3D"mailto:Healeys@autox.team.net";>Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys";>http://autox.tea=
m.net/mailman/listinfo/healeys</a><br>
<br>
s/ah100register@gmail.com">
http://autox.team.net/mailman/options/healeys/ah100register@gmail.com</a><b=
r>
<br>
</blockquote>
</div>
<br clear=3D"all">
<div><br>
</div>
-- <br>
<div dir=3D"ltr" class=3D"x_gmail_signature">
<div dir=3D"ltr">Best wishes
<div><br>
</div>
<div>John Harper</div>
<div><br>
</div>
<div>AHC UK 100 Register Secretary</div>
</div>
</div>
</div>
</blockquote>
</div>
<br>
<fieldset class=3D"x_mimeAttachmentHeader"></fieldset>
<pre class=3D"x_moz-quote-pre">____________________________________________=
___
am.net/donate.html">http://www.team.net/donate.html</a>

Archive: <a class=3D"x_moz-txt-link-freetext" href=3D"http://www.team.net/p=
ipermail/healeys">http://www.team.net/pipermail/healeys</a> <a class=3D"x_m=
oz-txt-link-freetext" href=3D"http://autox.team.net/archive";>http://autox.t=
eam.net/archive</a>

<a class=3D"x_moz-txt-link-abbreviated" href=3D"mailto:Healeys@autox.team.n=
et">Healeys@autox.team.net</a>
<a class=3D"x_moz-txt-link-freetext" href=3D"http://autox.team.net/mailman/=
listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a>

ox.team.net/mailman/options/healeys/coudesluijs@chello.nl">http://autox.tea=
m.net/mailman/options/healeys/coudesluijs@chello.nl</a>

</pre>
</blockquote>
</div>
</body>
</html>

--_000_CY4PR07MB34327347951C4CE8ACE21C35A5FA0CY4PR07MB3432namp_--

--===============5943909369765488015==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys



--===============5943909369765488015==--

<Prev in Thread] Current Thread [Next in Thread>