[Top] [All Lists]

Re: Exhaust fitting

To: "John M. Trindle" <>
Subject: Re: Exhaust fitting
From: Kevin Sullivan <>
Date: Wed, 17 Jan 1996 08:14:53 -0600 (CST)
the coolest solution would be a new custom downpipe.  pretty cheap, too.
depending on sizes, you could have a pipe that fits inside the collector 
and outside the ansa.  if the size isn't right you can get an adapter.  
if the downpipe requires a custom bend a muffler shop can do it for not 
much money.  (i say this after getting screwed by a local shop.  i'm now 
running a straight pipe on my f**d e****t.  it's not too loud; the cat 
conv soaks up a lot of noise.  the mga was LOUD when i had it's muffler 
off.  it's still pretty loud with a glass pack.)

Kevin Sullivan -- 1960 MGA
Nichols Research Corp.
Shalimar FL USA

<Prev in Thread] Current Thread [Next in Thread>