Date: April 13, 1998
You still need to back off the adjusters as the shoes wear a bit of a grove
(or trench) in the inside of the drum. Once the crews have been removed
you might try to knock them with a hammer to get them to free up from the
axle and then use the adjusters to bring in the shoes then the drums should
come off.
Bob Reisse
76 MGB
At 02:01 PM 4/13/98 -0500, Harris Goldstein wrote:
>I'm having a difficult time removing my brake drums. After removing the
>drum retaining screws, it still doesn't want to come off. The shoes
>shouldn't be too tight, since the wheel turns easily by hand. Any
>suggestions.
>
>Thanks,
>Harris Goldstein
>1973 (and a half) B
>
>
>
|