[Top] [All Lists]

Re: Aluminum heads

Subject: Re: Aluminum heads
Date: Wed, 24 May 2000 22:52:01 EDT
Section B.11 of my Bentley manual (page 111) and I quote:
"Where a torque spanner is available 14-mm plugs should be tightened to 
between 27 and 30 lb. ft. (3.7 and 4.1 kg. m.)."

or if you perfer:

Generic torque spec for gasketed plugs is 25 ft. lbs. and for taper seats is 
10 ft. lbs
Hope this helps,

In a message dated 05/24/2000 10:44:19 AM Pacific Daylight Time, writes:

> OK, here's a question: what is the torque spec for an MGB spark plug? 
>  Someone asked me this question and I could not find it in Bentley.

<Prev in Thread] Current Thread [Next in Thread>