[Top] [All Lists]

Re: Seat Upholstery Questions

Subject: Re: Seat Upholstery Questions
Date: Thu, 5 Apr 2001 23:57:04 EDT

I normally use 3 M 77 Spray on mine and don't have a problem at all with it.  
Just use a light coating is all you need.  I also use that for any carpet 
applications such as in the boot.

As far as the packing strips they are 20 5/8 x 1 -1/16 by 1/4 thick.

Hope this helps,

Best regards,

Jeff Zorn
Little British Car Co., Ltd.
Visit us on the web

In a message dated 4/5/01 9:34:39 PM Eastern Daylight Time, 

<< Subj:     Seat Upholstery Questions
 Date:  4/5/01 9:34:39 PM Eastern Daylight Time
 From: (Bud Krueger)
 Reply-to: (Bud Krueger)
 To: (MG List)
 It's resolved, I'm going to recover them myself, one at a time.  Tonight I
 disassembled the backrest (excuse me, I meant to say 'squab') and read 
 the directions that came with the Moss kit.  Uh oh! I probably should have 
 green-thumbed it.  I'm not enthralled over the idea of using contact cement 
 components that are going to need to be shifted for best fit.  Anyone have a
 suggestion for a better adhesive to use?  Any other hints and suggestions 
 be gratefully received.
 One more thing --- does anyone happen to have a set of dimensions for the 
 packing strips that go under the seat slides?  Mine are hopelessly distorted.
 -- >>

/// mailing list
///  (If they are dupes, this trailer may also catch them.)

<Prev in Thread] Current Thread [Next in Thread>