> Hmmm. If the pump was trying to draw current and you saw 12v at the pump
> terminals then the wiring back to the supply is OK and the pump wasn't
> pumping for some other reason. If the pump is trying to draw currenrt and
> there is a bad connection back towards the supply then you will
> significantly less than 12v at the pump, possibly nothing at all.
> Conclusion? Your pump will probably go AWOL again.
I would agree, but the "ifs" weren't satisfied in this case:
I saw 12 volts at the pump terminals with them *disconnected*.
The pump would not work when connected to the terminals, but worked
every time when connected to the battery terminals and is working
reliably connected to the new wires.
Red Dirt Rangers (Rocky on piano): http://www.reddirtrangers.com
JJ Cale Live (w/Rocky): http://www.rocky-frisco.com/calelive.htm
The Luggage Fan Club: http://groups.yahoo.com/group/luggage-fans
/// firstname.lastname@example.org mailing list
/// or try http://www.team.net/cgi-bin/majorcool